Courses - Page 2 of 44 - IT Training and Certification

SPAUI: Implementing Automation for Cisco Service Provider Solutions

3 Days ILT, VILT

The Implementing Automation for Cisco Service Provider Solutions (SPAUI) v1.0 course prepares you to implement and support automation solutions in a Service Provider network infrastructure, using network programmability principles, protocols, tools, and mechanisms. Through a combination of lessons and hands-on labs, you will learn to deploy, configure, monitor, and operate Service Provider network environments using modern data models.

These models allow you to represent operational data and new network management protocols in order to administer hundreds or thousands of devices in a single operation, replacing traditional, time-consuming, error prone, device-by-device Command Line Interface (CLI) management. The course also introduces powerful automation solutions that can streamline network operations.

This course covers Yet Another Next Generation (YANG) data models and validation tools, Representational State Transfer Configuration Protocol RESTCONF and Network Configuration Protocol (NETCONF) management protocols, model-driven telemetry with Google Remote Procedure Call (gRPC) and Google Network Management Interface (gNMI), traffic automation with XR Transport Control (XTC), Secure Shell (SSH)-based automation tools like NetMiko and Ansible, orchestration provided by Network Services Orchestration (NSO), Network Function Virtualization (NFV) lifecycle management with Elastic Services Controller (ESC), and network operations automation with WAN Automation Engine (WAE).This course prepares you for the 300-535 Automating and Programming Cisco® Service Provider Solutions (SPAUTO) exam.

Introducing Automation for Cisco Solutions (CSAU) is required prior to enrolling in Implementing Automation for Cisco Service Provider Solutions (SPAUI) because it provides crucial foundational knowledge essential to success. This course also earns you 24 Continuing Education (CE) credits towards recertification.

DCAUI: Implementing Automation for Cisco Data Center Solutions

3 Days ILT, VILT

Learn how to implement Cisco Data Center automated solutions including programming concepts, orchestration, and automation tools.

This training shows you how to implement Cisco Data Center automated solutions, including programming concepts, orchestration, and automation tools. The goal of this training is to highlight the tools and benefits of leveraging programmability and automation in the Cisco-powered data center.

Examined platforms include Cisco ACI (the controller-based Data Center environment), Cisco NX-OS on all Cisco Nexus platforms for device-centric automation, and Cisco UCS for Data Center compute. Their current ecosystem of APIs, software development toolkits, and relevant workflows is inspected in detail together with open industry standards, tools, and APIs, such as Python, Ansible, Git, JSON/YAML, NETCONF/RESTCONF, and YANG.

This training prepares you for the Automating Cisco Data Center Solutions (300-635 DCAUTO) exam. If passed, you earn the Cisco Certified DevNet Specialist – Data Center Automation and Programmability certification and satisfy the concentration exam requirements for the CCNP Data Center and CCNP DevNet Professional certifications.

The Introducing Automation for Cisco Solutions (CSAU) training is required prior to enrolling in the Implementing Automation for Cisco Data Center Solutions (DCAUI) training because it provides crucial foundational knowledge essential to success.

This course also earns you 24 Continuing Education (CE) credits towards recertification.

SAUI: Implementing Automation for Cisco Security Solutions

3 Days ILT, VILT

The Implementing Automation for Cisco Security Solutions (SAUI) course teaches you how to design advanced automated security solutions for your network. Through a combination of lessons and hands-on labs, you will master the use of modern programming concepts, RESTful Application Program Interfaces (APIs), data models, protocols, firewalls, web, Domain Name System (DNS), cloud, email security, and Cisco^® Identity Services Engine (ISE) to strengthen cybersecurity for your web services, network, and devices. You will learn to work within the following platforms: Cisco Firepower^® Management Center, Cisco Firepower Threat Defense, Cisco ISE, Cisco pxGrid, Cisco Stealthwatch^® Enterprise, Cisco Stealthwatch Cloud, Cisco Umbrella^®, Cisco Advanced Malware Protection (AMP), Cisco Threat grid, and Cisco Security Management Appliances. This course will teach you when to use the API for each Cisco security solution to drive network efficiency and reduce complexity.

This course prepares you for 300-735 Automating and Programming Cisco Security Solutions (SAUTO) certification exam. Introducing Automation for Cisco Solutions (CSAU) is required prior to enrolling in Implementing Automation for Cisco Security Solutions (SAUI) because it provides crucial foundational knowledge essential to success. This course also earns you 24 Continuing Education (CE) credits towards recertification.

ENAUI: Implementing Automation for Cisco Enterprise Solutions

3 Days ILT, VILT

Showcase your ability to implement enterprise automated solutions including programming concepts, Python programming, API, controllers and automation tools.

The Implementing Automation for Cisco Enterprise Solutions (ENAUI) training teaches you how to implement Cisco Enterprise automated solutions, including programming concepts, orchestration, telemetry, and automation tools.

This course highlights the tools and the benefits of leveraging programmability and automation in the Cisco-powered Enterprise Campus and WAN. You will also examine platforms including IOS XE software for device-centric automation, Cisco DNA Center for the intent-based enterprise network, Cisco Software-Defined WAN, and Cisco Meraki. Their current ecosystem of APIs, software development toolkits, and relevant workflows are studied in detail together with open industry standards, tools, and APIs, such as Python, Ansible, Git, JSON/YAML, NETCONF/RESTCONF, and YANG.

FT-NAC: FortiNAC Training

3 Days ILT, VILT

In this three-day FT-NAC: FortiNAC course, you will learn how to leverage the powerful and diverse capabilities of FortiNAC, using best practices for achieving visibility, control, and response.

In interactive labs, you will explore the administrative tasks necessary to achieve network visibility, control, and automated threat response. These fundamentals will provide you with a solid understanding of how to implement network visibility and security automation.

FT-FAC: FortiAuthenticator Administrator Training

3 Days ILT, VILT

In this three-day FT-FAC: FortiAuthenticator Training class, you will learn how to use FortiAuthenticator for secure authentication and identity management. You will learn how to configure and deploy FortiAutheticator, use FortiAuthenticator for certificate management and two-factor authentication, authenticate users using LDAP and RADIUS servers, and explore SAML SSO and how FortiAuthenticator can act as both a SAML identity provider and service provider.

Finally, you will examine some helpful troubleshooting techniques.

In interactive labs, you will explore how to authenticate users, with FortiAuthenticator acting as a RADIUS and LDAP server, a certificate authority (CA), and logon event collector that uses—and extends—the Fortinet Single Sign-On (FSSO) framework to transparently authenticate users. You will explore portal services, FortiTokens, and digital certificates.

FT-FSM: FortiSIEM Basic Training

3 Days ILT, VILT

In this three-day FT-FSM: FortiSIEM Basic Training course, you will learn about FortiSIEM initial configurations, architecture, and the discovery of devices on the network.

You will also learn how to collect performance information and aggregate it with syslog data to enrich the overall view of the health of your environment, how to use the configuration database to greatly facilitate compliance audits, and how to integrate FortiSIEM into your network awareness infrastructure.

Product version: FortiSIEM 6.3

Cloud Computing Training & Certification

AAPM: Advanced Administration & Performance Management

RM15,300.00

4 Days ILT, VILT

Invest in your future with Nutanix University training: The Industry standard for Hyperconverged Infrastructure.

This AAPM: Advanced Administration & Performance Management course explains in detail how to use Acropolis services such as Volumes, Files and Objects. The course also explains how to define, manage, and secure workloads and applications using Calm and Flow, including automation of the Life Cycle Management (LCM) application, and how to implement and configure Self Service Portal and governance.

This course also covers Data Protection solutions such as Metro Availability with Witness. Advanced management using the new features of Prism Central and the command line are also covered in detail. This includes how to take advantage of machine learning with entity management and resource optimization as well as how to plan for future growth using Scenario Management using Prism Pro.

SDWADV: Cisco SD-WAN Day-N Advanced Monitoring & Troubleshooting

RM15,277.00

4 Days ILT, VILT

This Cisco SD-WAN training is targeted to engineers and technical personnel involved in deploying, implementing, operating and optimizing Cisco SD-WAN solution, both in enterprise and Service Provider environments, including advanced features for centralized AAR/Data policies, QoS, application performance routing, configuration templates, control policies and troubleshooting common and advanced operating issues. The Cisco SD-WAN course is lab-intensive, and objectives are accomplished mainly through hands on learning.

Students taking this Cisco SD-Wan training course should be familiar with Wide Area Networks (WANs) in a variety of ways, which can be found below. Ideal candidates for this course include engineering and planning teams who evaluate WAN evolution, personnel involved in SD-WAN Design, Implementation and Operation, and others.

CATCPF: Catalyst Center and Catalyst 9K Programmability Integration Fundamentals

RM15,277.00

3 Days ILT, VILT

Cisco Catalyst Center (formerly Cisco DNA Center) enables programmable interactions and integrations through APIs (Application Programming Interfaces) and event notifications. This feature allows network administrators and developers to build custom integrations, automate tasks, and enhance network operations within the platform. By leveraging programmability in Catalyst Center, users can extend the functionality of the platform, achieve innovation, business agility, and improved visibility across their network infrastructure by creating custom solutions tailored to their specific needs, driving operational efficiency within their network environments.

CATCPF (Cisco Catalyst Center Programmability Integration Fundamentals) is a 3-day, instructor-led, Cisco Catalyst Center course that will help you to become familiar with programmable infrastructure concepts and integrations that support Catalyst Center and the Cisco Catalyst 9000 Series switch programming. In this course you will learn about production solutions that run on or interact with IOS-XE on the Catalyst 9000 switches and with Software Defined Access fabrics as well.

WXTW : Webex Teams Collaboration Workshop

RM15,277.00

3 Days ILT, VILT

Cisco Webex Teams is an app-centric, cloud-based service that provides a complete collaboration suite for teams to create, meet, message, call, care, whiteboard, and share, regardless of whether they’re together or apart—in one continuous work stream before, during, and after meetings. Being able to understand how this works and what the features are is the key focus of this 3-day course. NterOne’s Webex Teams Collaboration Workshop should be taken by students who have a working understanding of Cisco Collaboration Products.

This Cisco Webex Teams Workshop enables learners to describe Cisco Webex Teams, comprehend Cisco Webex Teams Meetings, and grasp Cisco Webex Teams Messaging, among much more. This workshop is intended to be taken by system engineers, system administrators, architects, and channel partners. Learn more below.

SDWMER : Operating Cisco SD-WAN Meraki 2.0

RM15,277.00

3 Days ILT, VILT

This 3-day course is hands-on training on Cisco Meraki SD-WAN implementations, basic and advanced Cisco Meraki SD-WAN Security features that are available on Meraki MX routers. Deep dive into capabilities like Firewall and Traffic, Application Aware Firewall, AMP Integration, Content Filtering and Threat protection and many other advanced features are covered as a part of this training. This course also provides hands-on training on Cisco Meraki SD-WAN Programmability features.

C98WF6 : Configuring Cisco Catalyst 9800 and Intro to Wi-Fi 6 v2.0

RM15,277.00

3 Days ILT, VILT

Configuring Cisco Catalyst 9800 and Intro to Wi-Fi 6 (C98WF6) is a course designed to help students understand how the Catalyst 9800 Series wireless controllers combine the best of RF excellence with IOS XE benefits.

This course begins with a description of the Cisco Catalyst 9800 and its benefits while introducing the learner to Wi-Fi 6. The configuration, migration, and troubleshooting will also be covered in this instructor-led course.

SDWSEC : Cisco SD-WAN Advanced Policy and Security

RM15,277.00

3 Days ILT, VILT

SDWSECis a Cisco SASE (Secure Access Service Edge) training targeted to engineers and technical personnel involved in designing, deploying, operating, and securing Cisco Edge solutions both in enterprise and Service Provider environments.

This training is specifically designed for partners and customers implementing secure Cisco SD-WAN integrated with the complete feature set of Cisco Umbrella including DNS Security, Cloud Based Firewall and Secure Internet Gateway. The course walks you through how each integration works and how to design and implement it step-by-step.

ADMUMB : Administering Cisco Umbrella

RM15,277.00

3 Days ILT, VILT

Cisco Umbrella is a cloud security platform that provides the first line of defense against threats on the Internet. Being able to understand and position how Cisco Umbrella works and what are the features is the key focus of this 3-day Cisco online IT class. Students who enter the course with a basic understanding of Cisco products and IT solutions will be able to describe the Cisco Umbrella, understand Secure Internet Gateway and Ransomware Protection, discuss Threat Intelligence, and use Cisco Roaming Client.

DNASPA: Administering Cisco DNA Spaces

RM15,277.00

3 Days ILT, VILT

Cisco DNA Spaces helps resolve physical-space ‘blind spots’ inside an organization. Through Cisco wireless infrastructure, organizations can gain insights into how people and things move throughout their physical spaces. Based on these insights, organizations can drive operational efficiencies by monitoring and managing the location, movement, and utilization of assets.

This course enables learners how to use DNA Spaces to drive operational efficiency across environment types. Learners will understand use-cases and obtain the ability to identify procedures and applications when implementing and operating DNA spaces that are getting ‘back to business’ or business as usual.

This course covers both basic and advanced operational elements of DNA Spaces while considering Data Analytics in the context of DNA Spaces. You will perform a hands-on ‘deep-dive’ into the solution and perform on-boarding of wireless infrastructure. Subsequently, you will configure the DNA Spaces solution both tactically and strategically. This will include elements such as behavioral metrics, location analytics, captive portals, profiling, customer engagements, Internet of Things, asset identification and management, and API interfaces for streaming and notifications. You will also explore DNA Spaces App Center and IoT Device Marketplace.

CMESERIES: Configuring and Monitoring NetApp E-Series and EF-Series Storage Systems

4 Days ILT, VILT

In this course, you learn how to deploy, configure, and monitor NetApp ESeries or EF-Series storage systems. In the deployment phase, you use both the NetApp SANtricity® Storage Management and System Management software to create the configuration, perform administrative tasks, and employ data protection features.

You also learn how to configure attached servers for I/O operations. During post-deployment, you use SANtricity Unified Manager and System Management software and to collect storage system information for trend analysis, troubleshooting, performance monitoring, and tuning.

CATSP: ONTAP Troubleshooting

4 Days ILT, VILT

In this CATSP: ONTAP Troubleshooting course, you increase your proficiency as a NetApp ONTAP software engineer by learning how to troubleshoot ONTAP environments. Specifically, you learn how to troubleshoot the management component, scale-out networking, NAS protocols (NFS and SMB), and SAN protocols (iSCSI).

From lectures, demonstrations, and active exercises, you learn how to isolate issues, verify configurations, view logs, view trace messages, and use event management system messages for troubleshooting.

FT-FWB: FortiWeb Training

3 Days ILT, VILT

In this course, you will learn how to deploy, configure, and troubleshoot FortiWeb. You will learn key concepts of web application security, and explore protection and performance features. You will experience traffic and attack simulations that use real web applications. You will learn how to distribute the load from virtual servers to real servers, while enforcing logical parameters, inspecting flow, and securing HTTP session cookies. You will also learn how to train and configure machine learning, and how to configure API protection and bot mitigation.

Virtualization IT Training & Certification

EDU-VSFT: VMware vSphere: Fast Track [V8]

5 Days ILT, VILT

Through a mix of lecture and hands-on labs, you will install, configure and manage vSphere . You will explore the features that build a foundation for a truly scalable infrastructure and discuss when and where these features have the greatest effect. This course prepares you to administer a vSphere infrastructure for an organization of any size using vSphere, which includes VMware ESXi™ 7 and VMware vCenter Server.

VWAAS: Implementing Cisco Virtual Wide Area Application Services

RM15,000.00

5 Days ILT, VILT

The Implementing Cisco Virtual Wide Area Application Services (VWAAS) v1.0 course teaches learners how to deploy, configure, operate, maintain and support a solution using Cisco Virtual Wide-Area Application Services (VWAAS) that provides performance optimization for application data over WAN. The learner will also understand the Cisco VWAAS optimization technologies, protocols, services, functions, advanced features and operation.

The learner will learn how to implement, integrate, install, manage and troubleshoot Cisco VWAAS solutions in diverse Data Center virtualization environments such as in Enterprise networks and Virtual Private Clouds. In this course learner will gain a comprehensive hands-on VWAAS labs experience.

SPCOR: Implementing and Operating Cisco Service Provider Network Core Technologies v1.0

5 Days ILT, VILT

The Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) v1.0 course teaches you how to configure, verify, troubleshoot, and optimize next-generation, Service Provider IP network infrastructures. It provides a deep dive into Service Provider technologies including core architecture, services, networking, automation, quality of services, security, and network assurance.

This course also helps you prepare to take the 350-501 Implementing and Operating Cisco Service Provider Network Core Technologies (SPCOR) exam, which is part of the new CCNP Service Provider certification and the Cisco Certified Specialist – Service Provider Core certification. This course also earns you 64 Continuing Education (CE) credits towards recertification.

ECSD: Nutanix Enterprise Cloud Solution Design Boot Camp

RM14,444.00

3 Days ILT, VILT

The Nutanix Enterprise Cloud Solution Design Boot Camp is designed to provide you with a technical deep dive into Nutanix-based solutions and the Nutanix solution design methodology, which is based on the Nutanix Platform Expert (NPX) Program. And has been used to consistently deliver business critical solutions to the most demanding customers – from SMB to the G2000.

The goal of this three-day boot camp is to prepare you to engage with enterprise customers and design Nutanix Enterprise Cloud solutions that deliver real business value. The boot camp is led by an onsite team of dedicated NPX-certified instructors who will focus on designing multi-hypervisor solutions capable of supporting enterprise-class applications according to clearly defined service level agreements.

During the boot camp you will be asked to choose a hypervisor, divide into teams, and engage in a multi-day, interactive role-play exercise to extract the business requirements, technical requirements, risks, and constraints that will shape their solutions. And requires daily design presentations from each team and participation in Q&A sessions with instructors and peers. You will be required to defend your team’s design decisions at each stage of the exercise.

This is an intense and immersive learning experience that will change how you approach enterprise solution design and delivery. The cost of this bootcamp is completely covered, you will just be responsible for your own travel and expenses.

FT-FWC: FortiWLC Training

3 Days ILT, VILT

In this three-day FT-FWC: FortiWLC Training class, you will learn how to design, implement, and maintain a basic FortiWLC-based wireless network.

The practical labs will give you hands on experience in configuration, management, and monitoring of the wireless network

EDU-NSXTD32: VMware NSX-T Data Center: Design [V3.2]

5 Days ILT, VILT

This five-day EDU-NSXTD32: VMware NSX-T Data Center: Design [V3.2] course provides comprehensive training on considerations and practices to design a VMware NSX-T™ Data Center environment as part of a software-defined data center strategy.

This course prepares the student with the skills to lead the design of NSX-T Data Center offered in release 3.2, including design principles, processes, and frameworks. The student gains a deeper understanding of the NSX-T Data Center architecture and how it can be used to create solutions to address the customer’s business needs.

Product Alignment: NSX-T Data Center 3.2

SPCNI: Designing and Implementing Cisco Service Provider Cloud Network Infrastructure

5 Days ILT, VILT

The Designing and Implementing Cisco Service Provider Cloud Network Infrastructure (SPCNI) training teaches you how to design and implement virtualization cloud infrastructures in a service provider network. You will learn about virtualized network function infrastructures and how to use programmability and orchestration to manage virtualization cloud infrastructures. You will also learn about cloud computing and implementation of cloud interconnect and data center interconnect solutions. In addition, you will learn how to monitor and secure virtualization cloud infrastructures and provide optimization and high availability within the infrastructures.

This training prepares you for the 300-540 SPCNI v1.0 exam. If passed, you earn the Cisco Certified Specialist – Service Provider Advanced Routing Implementation certification and satisfy the concentration exam requirement for the Cisco Certified Network Professional (CCNP) Service Provider certification.

SPRI: Implementing Cisco Service Provider Advanced Routing Solutions v1.1

5 Days ILT, VILT

The Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) course teaches you theories and practices to integrate advanced routing technologies including routing protocols, multicast routing, policy language, Multiprotocol Label Switching (MPLS), and segment routing, expanding your knowledge and skills in service provider core networks.

This course prepares you for the 300-510 Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) exam. This course also earns you 40 Continuing Education (CE) credits towards recertification.

Out of stock

IT Infrastructure Training and Certification

WM855G: CICS v5 CICSPlex System Manager Administration

1 Day ILT, VILT

An updated version of this course is available. For more information, click CICS V5.3 CICSPlex System Manager Administration (WM856G).

This advanced-level course teaches you how to install, configure, and use CICS TS System Manager components and functions.

OL66G: IBM i Performance Tuning – II: Advanced Analysis and Capacity Tuning

RM14,277.00

4 Days ILT, VILT

This course will help you to better understand the techniques of performance analysis and capacity planning on systems and partitions running IBM i and develop an appreciation of how IBM i operates and interfaces with applications. This course is expected to build skills to better manage performance and capacity on systems and partitions running IBM i.

The course explains IBM i concepts, including the Technology Independent Machine Interface (TIMI), main storage pools, auxiliary storage pools, management of jobs, threads, and tasks, job run-time structure, performance monitoring, data collection, and analysis of performance data.

This course includes hands-on activities using performance data from IBM i systems to help the student appreciate the concepts discussed. This course is designed for those running Power Systems on IBM i. While it includes i 7.2 content, it is suitable for those currently using prior versions of IBM i.

The first part of this course (units 1-6) focus on teaching the performance management process, the performance considerations of key hardware components and virtualization options, and tuning options to help optimize performance. During these lectures, students should gain an appreciation of the unique storage management and work management components in the IBM i architecture and how these components need to be managed for optimal performance.

The second part of this course focuses on the tools and techniques to monitor, analyze, and plan for performance of Power Systems with IBM i and Logical partitions (LPARs).

The primary analysis tool that will be used is the Performance Data Investigator (PDI) which is included with IBM Navigator for i. PDI is also used with IBM Systems Workload Estimator (WLE) for capacity planning activities.

GCP-AMLTF: Advanced Machine Learning with TensorFlow on Google Cloud

RM14,000.00

5 Days ILT, VILT

This GCP-AMLTF: Advanced Machine Learning with TensorFlow on Google Cloud course will give you hands-on experience optimizing, deploying, and scaling a variety of production ML models. You’ll learn how to build recommendation systems
and scalable, accurate, and production-ready models for structured data, image data, time series, and natural language text.

EDU-VRAAFT8: VMware vRealize Automation: Advanced Features and Troubleshooting [V8.x]

5 Days ILT, VILT

Simplify your cloud experience with vRealize Automation – the modern automation platform.

This is a five-day course that is a follow-on to the VMware vRealize® Automation Install, Configure, Manage course. In this course, you go deeper into using the advanced features of vRealize Automation to deploy user systems and interface vRealize Automation with other platforms. The course covers deploying and enterprise level cluster environment using VMware vRealize® Suite Lifecycle Manager.

This VMware course makes heavy use of hands-on labs. Students can run 41 labs during the 5-day course.

Product Alignment

VMware vSphere® 7.0
VMware vRealize Automation 8.1
VMware vRealize Orchestrator 8.1
VMware vRealize® Suite Lifecycle Manager™ 8.1
VMware NSX-T Data Center 3.0

EDU-260: Cortex XDR: Prevention and Deployment

RM13,500.00

3 Days ILT, VILT

This instructor-led training enables you to prevent attacks on your endpoints. After an overview of the Cortex XDR components, the training introduces the Cortex XDR management console and demonstrates how to install agents on your endpoints and how to create Security profiles and policies.

The training enables you to perform and track response actions, tune profiles, and work with Cortex XDR alerts. It concludes by discussing basic troubleshooting of the agent, the on-premises Broker VM component, and Cortex XDR deployment.

EDU-330: Firewall Troubleshooting

RM13,500.00

3 Days ILT, VILT

Successful completion of this three-day, instructor-led course will enhance the participant’s understanding of troubleshooting the full line of Palo Alto Networks next-generation firewalls.
Participants will perform hands-on troubleshooting related to the configuration and operation of the Palo Alto Networks firewall.

Completing this class will help participants develop an in-depth knowledge of how to troubleshoot visibility and control over applications, users, and content.

Analytics and Data Training and Certification

SPLK-APUFS: Advanced Power User Fast Start

3 Days VILT

The Splunk Core Certified Advanced Power User course is designed to take your Power User skills to the next level. It focuses on complex searching and reporting, advanced use cases of knowledge objects, and best practices for dashboards and forms.

ECA: Nutanix Enterprise Cloud Administration 6.10

RM13,500.00

4 Days ILT, VILT

Explore the breadth and depth of Prism Central’s centralized management capabilities.

If you already have experience with administering a Nutanix environment, this Nutanix Enterprise Cloud Administration course will extend, deepen, and broaden your knowledge as you grow in your career as a Nutanix administrator.

Designed with Prism Central as the focal point, this Nutanix course illustrates the breadth and depth of Nutanix’s centralized management capabilities, and allows you to explore the wide variety of features that are available in this one, single web console.

ECA is divided into four major sections:

Understanding core Nutanix concepts, such as hyperconverged infrastructure (HCI) and the various Nutanix cloud solution packages. Also, the basic configuration of a cluster and the components that are needed to create and manage VMs – namely, networks and images.
Creating and managing VMs, how to protect VMs and their data, how to apply storage optimization features at the VM level, and how to migrate your workloads to a Nutanix environment.
Learn about alerts, events, log collection, reporting, and how to use various features in Prism Central to identify, analyze, and remediate performance issues.
Learn how to set up a cluster for maintenance activities – such as starting and stopping nodes and clusters – and how to manage and upgrade licenses and installed software with just a few clicks.

EDU-NSXTTO3: VMware NSX-T Data Center: Troubleshooting and Operations [V4.x]

5 Days ILT, VILT

This five-day hands-on EDU-NSXTTO3: VMware NSX-T Data Center: Troubleshooting and Operations [V3.2] training course provides you with the advanced knowledge, skills, and tools to achieve competency in operating and troubleshooting the VMware NSX-T™ Data Center environment. In this course, you are introduced to workflows of various networking and security constructs along with several operational and troubleshooting tools that help you manage and troubleshoot your NSX-T Data Center.

In addition, you are presented with various types of technical problems, which you will identify, analyze, and solve through a systematic process.

Product Alignment

NSX-T Data Center 3.2

You searched for: ""

Stay connected. Be the first to know.

Company

Customer Service

Principals

Stay connected. Be the first to know.

Trainocate: A Global Leader in Technology, Business, and People Development