Menu

You searched for: ""

  • Networking Training & Certification

    OPT201: Cisco NCS 2000 Deploying 96-Channel Flex Spectrum

    RM6,000.00
    3 Days ILT, VILT

    The Cisco NCS2000 Deploying 96-Channel Flex Spectrum (OPT201) v3.0 course shows you how to plan, configure, and control optical networks using the Cisco® Network Convergence System (NCS) 2000 series Flex Spectrum platform.

    The course teaches you how to design Flex Spectrum networks with multi-degree Reconfigurable Optical Add-Drop Multiplexer (ROADM) multi-shelf nodes using the Cisco Transport Planner (CTP) software.

    You’ll learn how to:

    • Install the Cisco NCS 2000 series hardware
    • Configure an optical network and circuits using the Cisco Transport Controller (CTC) software
    • Learn which components and configurations take advantage of and/or are required for the Flex Spectrum 96-channel feature
    • Configure optical networks with multidegree ROADM multishelf nodes
    • Configure optical networks with colorless, contentionless, omnidirectional and MPO cross-connect advanced features
    • Describe and configure the NCS 2000 400-Gbps Xponder line card
  • Networking Training & Certification

    OPT300: Cisco Optical Technology Advanced v2.0

    RM8,000.00
    4 Days ILT, VILT

    This is a Cisco High Touch Delivery Service Training – terms and conditions are subject to Cisco.

    The Cisco Optical Technology Advanced (OPT300) v2.0 course gives you the skills you need to deploy advanced features of the Cisco® Optical Networking Services (ONS) 15454 Multiservice Transport Platform (MSTP) and Cisco Network Convergence System (NCS) 2000 Series. In this course you’ll learn to how to use the Cisco Transport Planner Design Tool to create network topologies and advanced network topologies.

    You will learn how to use advanced Dense Wavelength Division Multiplexing (DWDM) features such as G.709 encapsulation, generic framing protocol G.7041, Layer 1 circuits, Quality of Service (QoS), cross ponder networks using T1 over Ethernet, and encryption.

  • Networking Training & Certification

    SEGRTE201: Implementing Segment Routing on Cisco IOS XR

    RM12,000.00
    4 Days ILT, VILT

    This is a Cisco High Touch Delivery Service Training – terms and conditions are subject to Cisco.

    The Implementing Segment Routing on Cisco IOS XR (SEGRTE201) v2.0 course covers the fundamental concepts of Segment Routing (SR), how to configure and verify segment routing within an Interior Gateway Protocol (IGP), and the interworking of Label Distribution Protocol (LDP) with segment routing.

    You will learn how to implement Topology-Independent Loop-Free Alternate (TI-LFA) using segment routing, and how to instantiate and verify segment routing traffic engineering policies. You will also learn how to implement segment routing within Border Gateway Protocol (BGP).

  • Networking Training & Certification

    SPMBL301: Cisco Ultra M Deployment and Operations

    RM12,750.00
    3 Days ILT, VILT

    This is a Cisco High Touch Delivery Service Training – terms and conditions are subject to Cisco.

    The Cisco Ultra M Deployment and Operations (SPMB301) v1.0 course teaches you about the hardware components of the Cisco® Ultra M virtual packet core solution, including Cisco Nexus® spine and leaf switches and Cisco Unified Computing System™ (Cisco UCS®) C240 M4S (Small Form Factor) servers. You will learn about the software components of the Ultra M solution, including the OpenStack Virtual Infrastructure Manager (VIM), the Ultra M Virtualized Network Function (VNF) architecture, and the Cisco Elastic Services Controller, and how the different components operate.

    The course also covers the operation and administration of the Red Hat Enterprise Linux operating system in relation to the Ultra M Undercloud and Overcloud deployments.

  • Networking Training & Certification

    DCACIA: Implementing Cisco Application Centric Infrastructure–Advanced v1.0

    5 Days ILT, VILT

    You will learn how to configure and manage Cisco Nexus 9000 Series Switches in ACI mode providing enhanced management and policy framework, along with the protocols used in the underlying fabric.

    The course also covers how to use Cisco ACI as a policy-driven solution that integrates software and hardware, and how to implement Cisco ACI Multi-Pod and Multi-Site deployments. You will gain hands-on practice implementing advanced ACI capabilities such as Rogue Endpoint Feature, Transit Routing, VRF Route Leaking, Contracts and Zoning Rules, Policy Based Redirect to Layer 4–7 Service Node, Multi-Pod Fabric and Cisco ACI®Multi-Site Orchestrator.

  • Networking Training & Certification

    IBNTRN: Transforming to a Cisco Intent-Based Network v1.1

    RM10,000.00
    5 Days VILT

    The Transforming to a Cisco Intent-Based Network (IBNTRN) v1.1 course teaches you how the functionality of Cisco® SD-Access fits into Cisco Digital Network Architecture (Cisco DNA™). Through a combination of lessons and hands-on learning, you will practice operating, managing, and integrating Cisco DNA Center, programmable network infrastructure, and Cisco SD-Access fundamentals.

    You will learn how Cisco delivers intent-based networking across the campus, branch, WAN, and extended enterprise and ensures that your network is operating as intended.

  • Networking Training & Certification

    DCIT: Troubleshooting Cisco Data Center Infrastructure

    Price range: RM10,500.00 through RM11,850.00
    5 Days ILT, VILT

    Scale the capabilities of the network with CCNP Data Center.

    The Troubleshooting Cisco Data Center Infrastructure (DCIT) v7.0 course shows you how to troubleshoot LAN, SAN, Cisco® Data Center Unified Fabric, Cisco Unified Computing System™ (Cisco UCS®), and Cisco Application-Centric Infrastructure (Cisco ACI®).

    You will learn methodologies and tools to identify issues that may occur in data center network architecture. You will get extensive hands-on practice troubleshooting installation, configuration and interconnectivity issues on Cisco Multilayer Director Switch (MDS) switches, Cisco Nexus® switches, Cisco Fabric Extenders (FEXs), Cisco UCS, Cisco ACI, and more.

    This DCIT: Troubleshooting Cisco Data Center Infrastructure course earns you 50 Continuing Education (CE) credits towards recertification.

  • Networking Training & Certification

    DCMDS: Configuring Cisco MDS 9000 Series Switches v3.6

    4 Days ILT, VILT

    Through expert instruction and extensive hands-on practice during this DCMDS: Configuring Cisco MDS 9000 Series Switches v3.6 course, you will learn how to deploy and use capabilities such as Virtual Storage Area Networks (VSANs), Role-Based Access Control (RBAC), N-Port Virtualization (NPV) fabric security, zoning, automation with NX-API, Slow Drain Analysis, SAN analytics, Fibre Channel over TCP/IP (FCIP) tunnels, and more.

    You will learn how to configure and implement platform features and learn troubleshooting techniques pertaining to Fibre Channel (FC) domains, firmware upgrades, zones, and zone mergers.

    .

  • Networking Training & Certification

    UCSDF: Cisco UCS Director Foundation

    RM6,000.00
    3 Days ILT, VILT

    The Cisco UCS Director Foundation (UCSDF) v6.6 course helps you understand concepts, architecture, and deployment use cases for Cisco UCS® Director. You will gain hands-on experience in deploying basic Cisco UCS Director solutions.

    You will also practice using core features that most implementations require, such as services design, using the self-service portal for provisioning services, creating workflows that enable cloud automation and standardize IT services, and more.

  • Networking Training & Certification

    UCSEC: Implementing Cisco Unified Communications Security

    RM10,000.00
    5 Days ILT, VILT

    The Implementing Cisco Unified Communications Security (UCSEC) v1.0 course is a new five-days ILT class that is designed to provide students with the necessary knowledge and skills to implement security features in a Cisco Unified Communications environment. Cisco Unified Communications support several features and mechanisms to secure voice signaling and communications and to mitigate attacks against Cisco Unified Communications networks.

    The Implementing Cisco Unified Communications Security (UCSEC) v1.0 course introduces security mechanisms and describes different implementation scenarios that increase the security level of Cisco Unified Communications networks.

  • Networking Training & Certification

    MCAST: Implementing Cisco Multicast v2.0

    RM10,000.00
    5 Days ILT, VILT

    The Implementing Cisco Multicast (MCAST) v2.0 course teaches you the fundamentals of IP multicasting, including multicast applications, sources, receivers, group management, and IP multicast routing protocols such as Protocol Independent Multicast (PIM) used within a single administrative domain. You will learn about issues in switched LAN environments and reliable IP multicasting, and technical solutions for simple deployments of IP multicast within a provider or customer network. The course reviews the configuration and troubleshooting guidelines for implementation of IP multicast on Cisco® routers. Labs offer hands-on experience to help you prepare to deploy IP multicast successfully.

  • Networking Training & Certification

    DCID: Designing Cisco Data Center Infrastructure

    Price range: RM7,500.00 through RM8,850.00
    5 Days ILT, VILT

    Demonstrate your mastery of the design and deployment options focused on Cisco data center solutions and technologies across network, compute, virtualization, automation, and security.

    The Designing Cisco Data Center Infrastructure (DCID) v7.0 course helps you master design and deployment options focused on Cisco® data center solutions and technologies across network, compute, virtualization, storage area networks, automation, and security. You will learn design practices for the Cisco Unified Computing System™ (Cisco UCS®) solution based on Cisco UCS B-Series and C-Series servers, Cisco UCS Manager, and Cisco Unified Fabric.

    You will also gain design experience with network management technologies including Cisco UCS Manager, Cisco Data Center Network Manager (DCNM), and Cisco UCS Director. You can expect theoretical content as well as design-oriented case studies in the form of activities.

    This course earns you 40 Continuing Education (CE) credits towards Cisco recertification.

Company

Customer Service

Principals

2025 Top 20 IT Training Company
HRD Corp Training Provider 2
2025 Top 20 IT Training Company
HRD Corp Training Provider 2

Trainocate: A Global Leader in Technology, Business, and People Development

In a world that never stands still, we help you move forward.

With over 30 years of experience, Trainocate has been empowering individuals and businesses to build the essential skills that drive growth and success. Whether it’s professionals advancing in their careers or organizations transforming their workforce, our training programmes deliver results.

Specializing in cloud computing, data & AI, cybersecurity, and digital leadership, our training is powered by industry-leading technology partners like AWS, Alibaba Cloud, Cisco, EC-Council, Fortinet, Google Cloud, IBM, ISACA, ISC2, Microsoft, NetApp, Nutanix, Oracle, Palo Alto, Splunk, Red Hat, Rocheston, Trend Micro, and VMware.

Trainocate Group operates in 24 countries blending global expertise with localized insights to train the next generation of tech professionals and business leaders.

Trainocate Malaysia, based in KL Eco City, is proud to be an HRD Corp Registered Training Provider and a Yayasan Peneraju ALTI, driving workforce development across Malaysia.

© Copyright Trainocate 2026. All rights reserved. HRDC IT Training Provider Malaysia
Go to Top